Imaavy Dosage

Preparation

Prepare the solution for infusion using aseptic technique as follows:

• Calculate the dosage (mg), total drug volume (mL) of IMAAVY solution required, and the number of IMAAVY vials needed, based on the patient's current weight . Each single-dose vial of IMAAVY is at a concentration of 185 mg/mL.
• Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Check that the solution in each vial is colorless to slightly brownish, clear to slightly opalescent, and free of visible particles. Do not use if visible particles are present or if the solution is discolored (other than colorless to slightly brownish).
• Gently withdraw the calculated volume of IMAAVY from the vial(s). Discard any unused portion of the vials.
• Dilute total volume withdrawn of IMAAVY by adding to an infusion container containing 0.9% sodium chloride injection to a final volume of:
  • 250 mL for patients who weigh 40 kg or more, or
  • 100 mL for patients who weigh less than 40 kg.
  Only use infusion containers made of polyolefin, polypropylene, or polyvinylchloride.
• Gently invert the infusion container at least 10 times to mix the solution. Do not shake.
• Verify that a uniform solution has been achieved by visual inspection. Do not use if particulate matter or discoloration is present.

Administration

• If the diluted solution is refrigerated prior to administration, allow to warm to room temperature. Do not use external heat sources to warm IMAAVY.
• Administer the diluted solution by intravenous infusion only using an infusion set with an in-line or add-on, sterile, non-pyrogenic, low protein-binding filter made of polyethersulfone or polysulfone (pore size 0.2 micrometer or less). Administration sets must be made of either polybutadiene, polyethylene, polyurethane, polypropylene, or polyvinylchloride.
• Do not infuse IMAAVY concomitantly in the same intravenous line with other agents.
• Administer IMAAVY infusion intravenously over at least 30 minutes for the initial dose (30 mg/kg) and at least 15 minutes for subsequent doses (15 mg/kg).
• If an adverse reaction occurs during administration of IMAAVY, the infusion may be slowed or stopped at the discretion of the healthcare professional.
• Monitor the patient for 30 minutes after each infusion for signs or symptoms of an infusion-related or hypersensitivity reaction.